DYNAGARD "Plus" Wire Rope Cleaning Solvent

Dynagard Plus is an excellent solvent for cold (room temperature) cleaning of a wide variety of manufacturing equipment, wire rope, and products including common and exotic metals, reinforced fiber glass and plastics.

Dynagard Plus is an excellent product for use in industry because none of its ingredients are listed as a carcinogen, nor does it contain any ozone depleting chlorinated solvents. It may be used to replace MEK (Methl.Ethyl.Ketone) and 111 trichloroethylene, which are very hazardous to employees' health and the environment, but are used everyday to degrease, clean metal parts, and to strip paint and ink. The low evaporation rate helps decrease the amount of solvent used compared to chlorinated solvents. It is safe and easy to use.

Methods of Use:
• Dynagard Plus can be wiped on with a cloth...
• Placed in an agitated soak tank.
• Applied as a spray.
• Pumped through the Kirkpatrick Wire Rope Lubrication Collar.
• Not to be used in a vapor degreaser.

Directions for Use:
• Dynagard Plus can be diluted up to 3 to 1 with water or use full strength.
• Use a cloth soaked in Dynagard Plus, wipe on part or wire rope to be cleaned. After part/wire rope is cleaned, wipe with water-wet cloth.
• It can be used in agitated soak tank. Use a highly agitated tank so there will be some physical action as well as chemical action. After parts are cleaned, rinse with water (spray or soak) for fast drying of parts.
• Spray should be sufficient to give some physical action as well as chemical action. Rinse with water for fast drying of parts.

ORDER NOW!