Kirkpatrick Standard Model Wire Rope Lubrication Systems

Prior to Reviewing System Information:

All Kirkpatrick Wire Rope Lubrication Systems are provided as an all-inclusive package. There is no itemized charge for each of the components listed in the Main System Package.

Standard Systems are available in three Models: Each Standard System Model incorporates a 50:1 ratio (100 oz. to 120 oz. per minute) Lubricant Delivery System as well as a Lubrication Collar capable of accommodating Seal and Scraper Plate Kit diameters from 1/4” (5mm/6mm) to 1-7/8″ (48MM).

Model SU35B: Fit for 5-Gallon (35 Pound / 15.75 Kgs.) Pails
Model SU120: Fit for 15-Gallon (120 Pound / 54 Kgs.) Mid-Sized Drum (Keg)
Model SU400: Fit for 55-Gallon (400 Pound / 180 Kgs.) Full-Sized Drum
Model SU400C: Fit for 55-Gallon (400 Pound / 180 Kgs.) Full-Sized Drum (High Flow)

Testimonial

Navy Work Department” San Diego, California

“Increases productivity, and reduces costs with automated cleaning and Wire Rope Lubrication System. (Kirkpatrick Model SU35B Wire Rope Lubricator)”

“Manual Wire Rope Preventative Maintenance of all of the Ship’s wires was taking a week to complete. Now, since receiving the Model SU35B Wire Rope Lubricator, the time to complete the project has been reduced to one day with fewer shipboard personnel involved.”

USS Rushmore (LSD 47), BM1 Irwin

Kirkpatrick Standard Model SU35B Wire Rope Lubrication System

US/NATO: NSN 4930-01-424-2197 NSN Terminology: Lubricating Unit
Standard System Fit for 35 Pound / 15.75 Kilogram / 5 Gallon Sized Pail

Each Standard System Model Accommodates Wire Rope / Seal Kit Diameters to 1-7/8 Inch (48mm)

1 High Grade, Heavy Duty, Light Weight Aluminum Lubrication Collar
Accommodates Seal & Wire Rope Diameters to 1-7/8 Inch (48mm)
1 One Diameter Seal & Scraper Plate Kit:
Scraper Plates are part of the Seal and Scraper Kit and are not sold at an additional charge as is the case with competitive brand Wire Rope Lubrication Systems.The Customer specifies the Diameter Seal & Scraper Plate Kit required when placing their order.
2 One Diameter & Lay Wire Rope Groove Cleaner Kit:
Includes 2 Individual Groove Cleaners (4 Parts)
The Customer specifies Diameter, the Number of Outer Strands and Lay Direction
Note: Our Competition Charges this item as an additional component apart from their Complete System and then only provide one individual Groove Cleaner, not two as is the case with Kirkpatrick supplied Groove Cleaner Kits.
1 Manual Wire Rope Stripper and Centering Bushing
·  Accommodates Wire Rope Diameters up to 52mm (MS-9110)
·  The Centering Bushing should match the Wire Rope / Seal Kit Diameter
1 50:1 Ratio Pump Package – (Includes One Pump Repair Kit)
·  8 Pound / 3.6 Kilograms per minute Maximum Flow Rate
·  All Standard Systems are supplied with one Pump Repair Kit
1 35 Pound / 15.75 Kilogram / 5 Gallon Sized Follower Plate
1 35 Pound / 15.75 Kilogram / 5 Gallon Sized Pail Cover
1 Air Regulator / Air Filter / Oiler Assembly with Gauge. 150 PSI Rated
1 7,000 PSI Rated Stainless Steel Lubricant Flow Control Valve
1 2,500 PSI Rated, 10 Foot / 3-Meter Lubricant Supply Hose.
·  Complete with Brass Push to Pull Quick Couplers.
·  Custom Lengths Available Upon Request.
1 One Sample Pail of Environmentally Acceptable (EAL) Dynagard Blue™ or Dynagard Blue CSS13™ Wire Rope Lubricant
1 Heavy Duty Storage Case Approved by Military & Law Enforcement

Kirkpatrick Standard Model SU120 Wire Rope Lubrication System

US/NATO: NSN: 4930-01-462-6338 NSN Terminology: Lubricating Unit
Standard System Fit for 120 Pound / 54 Kilogram /16 Gallon Mid-Sized Drums:

Each System Accommodates Wire Rope / Seal Kit Diameters up to 1-7/8 Inch (48mm)

1 High Grade, Heavy Duty, Light Weight Aluminum Lubrication Collar
Accommodates Seal & Wire Rope Diameters to 1-7/8 Inch (48mm)
1 One Diameter Seal & Scraper Plate Kit:
Scraper Plates are part of the Seal and Scraper Kit and are not sold at an additional charge as is the case with competitive brand Wire Rope Lubrication Systems.
The Customer specifies the Diameter Seal & Scraper Plate Kit required when placing their order.
2 One Diameter & Lay Wire Rope Groove Cleaner Kit:
Includes 2 Individual Groove Cleaners (4 Parts)
The Customer specifies Diameter, the Number of Outer Strands and Lay Direction
Note: Our Competition Charges this item as an additional component apart from their Complete System and then only provides one individual Groove Cleaner, not two as is the case with Kirkpatrick supplied Groove Cleaner Kits.
1 Manual Wire Rope Stripper and Centering Bushing
Accommodates Wire Rope Diameters up to 52mm (MS-9110)
The Centering Bushing should match the Wire Rope / Seal Kit Diameter.
1 50:1 Ratio Pump Package
·  8 Pounds / 3.6 Kilograms per minute Maximum Flow Rate
·  All Standard Systems are supplied with one Pump Repair Kit
1 120 Pound / 54 Kilogram / 16 Gallon Sized Follower Plate
1 120 Pound / 54 Kilogram / 16 Gallon Sized Pail Cover
1 Air Regulator / Air Filter/Oiler Assembly with Gauge. 150 PSI Rated
1 7,000 PSI Rated Stainless Steel Lubricant Flow Control Valve
1 2,500 PSI Rated, 10 Foot / 3-Meter Lubricant Supply Hose.
·  Complete with Brass Push to Pull Quick Couplers.
·  Custom Lengths Available upon request.
1 One Sample Pail of Environmentally Acceptable (EAL) Dynagard Blue™ or Dynagard Blue CSS13™ Wire Rope Lubricant
1 Heavy Duty Storage Case Approved by Military & Law Enforcement

Kirkpatrick Standard Model SU400 Wire Rope Lubrication System

Standard System Fit for 400 Pound / 180 Kilogram / 55 Gallon / Sized Drums

Each System Accommodates Wire Rope / Seal Kit Diameters to 1-7/8 Inch (48mm)

1 High Grade, Heavy Duty, Light Weight Aluminum Lubrication Collar
Accommodates Seal & Wire Rope Diameters to 1-7/8 Inch (48mm)
1 One Diameter Seal & Scraper Plate Kit:
Scraper Plates are part of the Seal and Scraper Kit and are not sold at an additional charge as is the case with competitive brand Wire Rope Lubrication Systems.
The Customer specifies the Diameter Seal & Scraper Plate Kit required when placing their order.
1 One Diameter & Lay Wire Rope Groove Cleaner Kit:
Includes 2 Individual Groove Cleaners (4 Parts)
The Customer specifies Diameter, the Number of Outer Strands and Lay Direction
Note: Our Competition Charges this item as an additional component apart from their Complete System and then only provides one individual Groove Cleaner, not two as is the case with Kirkpatrick supplied Groove Cleaner Kits.
1 Manual Wire Rope Stripper and Centering Bushing
Accommodates Wire Rope Diameters up to 52mm (MS-9110)
The Centering Bushing should match the Wire Rope / Seal Kit Diameter.
1 50:1 Ratio Pump Package:
8 Pounds / 3.6 Kilograms per minute Maximum Flow Rate
All standard Systems are supplied with one Pump Repair Kit
1 400 Pound / 180 Kilogram / 55 Gallon Sized Follower Plate
1 400 Pound / 180 Kilogram / 55 Gallon Sized Drum Cover
1 Air Regulator / Air Filter / Oiler Assembly with Gauge. 150 PSI Rated
2 7,000 PSI Rated Stainless Steel Lubricant Flow Control Valve
An additional Back-Up / Replacement Lubricant Flow Control Valve is provided at no additional charge as added insurance against job delay in the event damage occurs to the component.
1 2,500 PSI Rated, 10 Foot / 3-Meter Lubricant Supply Hose.
·  Complete with Brass Push to Pull Quick Couplers.
·  Custom Lengths Available Upon Request.
1 Heavy Duty Storage Case Approved by Military & Law Enforcement

Kirkpatrick Standard Model SU400C Wire Rope Lubrication System

High Flow Standard System Fit for 400 Pound / 180 Kilogram / 55 Gallon / Sized Drums

Each System accommodates Wire Rope and Seal Kit Diameters to 1-7/8 Inch (48mm)

1 Heavy Duty, Light Weight Aluminum Lubrication Collar
Wire Rope Diameters to 1-7/8 Inch (48mm)
1 One Diameter Seal & Scraper Plate Kit:
Scraper Plates are part of the Seal and Scraper Kit and are not sold at an additional charge as is the case with competitive brand Wire Rope Lubrication Systems.
The Customer specifies the Diameter Seal & Scraper Plate Kit required when placing their order.
1 One Diameter & Lay Wire Rope Groove Cleaner Kit:
Includes 2 Individual Groove Cleaners (4 Parts)
The Customer specifies Diameter, the Number of Outer Strands and Lay Direction Note: Our Competition Charges this item as an additional component apart from their Complete System and then only provides one individual Groove Cleaner, not two as is the case with Kirkpatrick supplied Groove Cleaner Kits.
1 Manual Wire Rope Stripper & Centering Bushing
Accommodates Wire Rope Diameters up to 52mm (MS-9110)
(The Centering Bushing should match the Wire Rope / Seal Kit Diameter)
1 50:1 Ratio Pump Package
24 Pound / 10.9 Kilograms per minute Maximum Flow Rate
1 400 Pounds / 180 Kilogram / 55 Gallon Drum Sized Follower Plate
1 400 Pounds / 180 Kilogram / 55 Gallon Drum Sized Pail Cover
1 150 PSI Rated Air Regulator/Air Filter/Oiler Assembly with Gauge.
1 7,000 PSI Rated Stainless Steel Lubricant Flow Control Valve
1 2,500 PSI Rated, 10 Foot / 3-Meter Lubricant Supply Hose.
·  Complete with Brass Push to Pull Quick Couplers.
·  Custom Lengths Available Upon Request.
1 One Sample Pail of Environmentally Acceptable (EAL) Dynagard Blue™ or Dynagard Blue CSS13™ Wire Rope Lubricant
1 Heavy Duty Storage Case Approved by Military & Law Enforcement