Dynagard Blue™ Environmental Wire Rope Lubricant

Dynagard Blue™ is an Unleaded Environmental Wire Rope Lubricant. This coating is non-sheening and excellent for resistance to softening under severe working conditions, water resistant, extreme pressure, and compatible with all Kirkpatrick Wire Rope Lubrication Systems in addition to Manual Applications.

The viscosity and slickness stay alive through the Wire Rope as the strands move during load-bearing operations. This attribute helps with continuous redistribution to cover any internal strand areas that may have been missed during the initial lubrication process.

Dynagard Blue™ has outstanding structural and chemical stability. An unleaded extreme pressure additive provides exceptional protection against wear and shock loads. Additional additives enhance resistance to water wash-off, protection against fling-off at high Wire Rope travel speeds, and long service in a high- temperature environment.

It won’t corrode steel and copper bearing alloys and is compatible with conventional Seal materials.

Recent LC-50 Bio-Aquatic toxicity tests using sensitive marine organisms performed by independent test laboratories have shown it to have over 250,000 PPM LC-50 rating making it possibly the best LC-50 value of any Wire Rope Lubricant marketed in the world today.

A copy of the test data is available upon request.

VGP Compliant. It’s LC-50 rating is 250x higher than the minimum 1,000 PPM requirement.

  • Approved 2006 QPL MIL-G-18458-D Type I (NSN No. 9150-01-520-8116)

A sample of Dynagard Blue™ Environmental Wire Rope Lubricant was used for a product testing study to determine the toxicity of a part per million dosages of product to the Americamysis Bahia (Marine Invertebrate) over a 90-day period. Tests were run on day 1, day 7, day 15, day 30, day 60, and day 90. This test was designed to verify the maximum length of time that the Dynagard Blue™ would maintain its optimal LC50 levels over 90 days. Previous tests showed the products to have over 25,000 PPM at 48 hours. An LC50 test was then performed for 90 hours; the results were 56,000 PPM. Then a third biodegradation test was performed at 90 days. The LC50 results were over 90,000 PPM.

Dynagard Blue™ Environmental Wire Rope Lubricant Specifications

National Stock Number: U.S Government & NATO 9150-01520-8116
MIL-PRF-18458C (Type I & Type II QPL)
Meets or surpasses requirements.
U.S. Navy Qualified Products List
Pass
05Q / 2006-268
LC50 Bio-Aquatic Rating, EPA/821-R-02-014
Test Duration: 48 Hr. Acute
Test Specimen used: Salt Water Species (Mysidopsis Bahia)
250,000 ppm (2016)
LC50 Bio-Aquatic Rating, EPA/821/R-02/012
Test Duration: 48 hr. Contracted by the Tennessee Valley Authority
Test Specimen: Fresh Water Species Ceriodaphnia Dubia and Pimephaleas Promelas
(Over 25,000 ppm-2008)
LC50 Bio-Aquatic (Degradation) Using same stock solution for 90 days.
From Day 1 to Day 90: 30,000 PPM more product solution to create the same toxicity level as day 1. Day 1= 62,942 PPM,
Day 90= 92,456 ppm
Test Specimen used: Mysidopsis Bahia
 
Viscosity NLGI Grade 2
Color Blue
Texture Smooth/Creamy
Mineral Oil% 50% Nominal
Oil Separation % (Fed 791-321.1) 1.94%
Penetration: mm, (ASRM D217) 305
Viscosity, cST AT 40 Degrees Centigrade 320
Viscosity, cST AT 100 Degrees Centigrade 21-23
Dropping Point, C (F) 177 C (350 F)
Low Temperature Flexibility (Section 4.4.4., No cracks @ 6 Degrees C) Pass
Rust Test, ASTM D-1743 Pass
Salt fog Corrosion Resistance ASTM B117 1,000 hr. / Pass
Salt Spray, Fed Standard 791, TM 4001 (10 days) Pass
Accelerated Weathering (ASTM G 152, 153) Pass
Load Wear Index (ASTM D2596) 34.43
Adhesive % (Sec. 4.6.6. 150 rpm @ 151 +/- 2 deg. F) 99.7
Volatile Matter (2.0% Max.) 1.02
4-Weld, Kilograms 250
4-Ball Wear Diameter, mm, max. 0.65